HP Surestore 6164 - Switch User Manual page 69

Using Web Tools
The Configure Threshold display changes according to the class and area
selected in the organizational tree. However, the Configure Thresholds tab
always contains the following buttons:
Default
Apply
Reset
Thresholds for the Environmental and GBIC Classes
The Environmental and GBIC classes both display a separate column for
each area (see Figure 22
The columns for the Temperature, Fan, RX Power, and TX Power areas
contain the following items:
Threshold Type
drop-down list
High/Low
drop-down list
Scale
Area drop-down list Select a Fabric Watch area.
Click to return settings to default values.
Click to apply the values specified in the current
display. When Apply is clicked after a change,
the following dialog displays:
Figure 23. Alarm Mechanism Dialog Box
To continue, select the type of alarm you want
and click Apply.
Click to undo the last changes that were applied.
).
Select the threshold type (outranged, above,
in-between, below, changed).
Select to enter the high and low settings for the
threshold type selected in the Threshold Type
drop-down list (not available for all areas).
Specify the point at which you want to set the
specified threshold.
69