Cfgenable - HP Surestore 6164 - Switch User Manual

cfgEnable

Enable a zone configuration.
Synopsis
Availability
Description
Operands
Example
See Also
42
cfgEnable cfgName
Administrator
Use this command to enable a zone configuration.
The configuration to be enabled is built when a specified zone
configuration is enabled. The configuration is built by checking for
undefined zone names, zone alias names, or other inconsistencies, and then
expanding zone aliases, removing duplicate entries, and installing the
enabled configuration.
If the build fails, the previous state is preserved (zoning remains disabled,
or the previous enabled configuration remains in effect). If the build
succeeds, the new configuration replaces the previous configuration.
See for a description of defined and enabled configurations.
cfgShow
The following operand is required:
Name of zone configuration to be enabled, in quotes.
cfgName
To enable the zone configuration "USA_cfg":
sw5:admin> cfgEnable "USA_cfg"
zone config "USA_cfg" is in effect
cfgClear
cfgDisable
cfgSave
cfgShow
Zoning User's Guide