Array Bezel And Front Panel - Dell EQUALLOGIC PS6500 Hardware Manual

PS6500 Hardware Maintenance
If a field-replaceable component fails, contact your PS Series support provider for information about obtaining a
replacement component.
Notes: Do not remove a component until you are ready to replace it. Do not operate the array for a long time with
a component removed.
To maintain adequate cooling, keep the PS6500 chassis cover closed when possible. If you must open the
cover to access the disk drives, channel cards, or EIP card, minimize the time that the cover is open.

Array Bezel and Front Panel

Figure 1-2 shows the bezel of a PS6500 array. The bezel conceals the array front panel and the power switch,
deterring a user from inadvertently turning off power to the array.
You must unlock and remove the bezel to view the front panel, as described in Removing and Installing the Bezel
on page 1-8.
Figure 1-3 shows the array front panel.
Power button. The power button is lit (blue) when you connect at least two power supply and cooling modules to
a source of power.
LCD Panel. If a hardware problem occurs, the affected component and a short description will appear in the LCD
panel. See LCD Panel Display on page 1-4.
1-2
Figure 1-2: PS6500 Bezel
Figure 1-3: PS6500 Front Panel
Figure 1-3 Description
Basic Array Information