Number Of Copies - Canon PIXMA MP280 Series Advanced Manual

>
Contents Overview of the Machine
C002
LED Display and Basic Operations
You can use the machine to make copies or perform maintenance operations without a computer.
This section describes the LED display and basic operations on the Operation Panel.
The number 1 appears on the LED normally when turning on the power.
The LED display indicates the machine status as follows.
Machine Status
While copying
While printing, scanning, or performing
maintenance operations
When an error occurs
While the Scanning Unit (Cover) is
open

Number of Copies

When copying starts, the specified number of copies appears on the LED. While copying is in progress,
the number on the LED flashes and decreases by one to indicate the remaining number of copies to be
made.
Each time you press the [ +] button, the number on the LED increases by one. When
number of copies is set to "20". Press the [ + ] button again to return to "1".
Maintenance Codes
To perform maintenance of the machine, press the
> LED Display and Basic Operations
LED Display
Number of copies (flashing)
(flashing in order)
E
and number appear alternately.
For details on the error codes, refer to "
the on-screen manual: Advanced Guide .
P and number appear alternately.
An error that requires contacting the service center may
have occurred.
For details, refer to " Troubleshooting
manual: Advanced Guide .
(flashing)
(Maintenance) button repeatedly until the desired
Advanced Guide Troubleshooting
" in
Troubleshooting
" in the on-screen
F
appears, the