Scanning To A Flash Drive; Clearing Jams; 202 Paper Jam - Lexmark X860 Quick Reference

7
Click Submit.
8
Review the instructions on the Scan Profile screen.
A shortcut number was automatically assigned when you
clicked Submit. You can use this shortcut number when you
are ready to scan your documents.
9
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
10
If you are loading a document into the ADF, then adjust the
paper guides.
11
Press , and then enter the shortcut number using the
keypad, or touch Held Jobs on the home screen, and then
touch Profiles.
12
After you enter the shortcut number, the scanner scans and
sends the document to the directory or program you specified.
If you touched Profiles on the home screen, then locate your
shortcut on the list.
13
Touch Finish the Job.
14
Return to the computer to view the file.
The output file is saved in the location you specified or
launched in the program you specified.

Scanning to a flash drive

1
Load an original document faceup, short edge first into the
ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the
paper guides.
3
Insert the flash drive into the USB port on the front of the
printer.
4
Touch Scan to USB drive.
5
Select the size and file that you want to scan.
6
Touch Scan It.

Clearing jams

Jam error messages appear on the control panel display and
include the area of the printer where the jam occurred. When there
is more than one jam, the number of jammed pages is displayed.
200–201 paper jams
1
Open Door A by pushing the release latch up and lowering the
door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2
Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling.
Push down and pull the green lever to make it easier to remove
the jam. Make sure all paper fragments are removed.
3
Close Door A.
3

202 paper jam

Clearing Area A
1
Open Door A by pushing the release latch up and lowering the
door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
2
Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling.
Push down and pull the green lever to make it easier to remove
the jam. Make sure all paper fragments are removed.
3
Close Door A.