Table of Contents
Advertisement
GeForce 8100/8200/8300-ITX series Motherboard
Front Panel Header
The front panel header on this motherboard is one connector used
to connect the following four cables (see Table 2 for pin definitions):
q PWR LED
Attach the front panel power LED cable to these two pins of the
connector. The Power LED indicates the system's status.
Front Panel Header Pins
FP1
10
KEY
8
GND
6
PWR_SW
4
PW_LED-
2
PW_LED+
Note: S ome chassis do not have all four cables. Be sure to match the name on
t he connectors to the corresponding pins.
q PWR SW
Attach the power button cable from the case to these two pins. Pressing the
power button on the front panel turns the system on and off rather than using the
power supply button.
q HDD LED
Attach the hard disk drive indicator LED cable to these two pins. The HDD
indicator LED indicates the activity status of the hard disks.
q RST SW
Attach the Reset switch cable from the front panel of the case to these two pins.
The system restarts when the RESET switch is pressed.
4
9
NC
7
RESET
5
GND
3
HDD_LED-
1
HDD_LED+
121
121
120
120
240
240
Advertisement
Table of Contents
