Diverting Incoming Calls - Ericsson T18s User Manual

All calls
< Activate >

Diverting Incoming Calls

If you want to make certain that your incoming calls are correctly handled
when you are unable to answer them, you can use the Call Divert service to
divert them to another phone number.
Note! The Call Divert service may not be available on all networks.
The Call Divert service lets you:
• divert calls if you are already on the phone,
• divert calls that you do not answer within a specified time limit (operator
dependent), No reply
• divert calls if your phone is turned off or if you are unreachable,
abl( e).
You may use any combination of the above.
You may also:
• divert all incoming calls,
arrow is shown in the display. If you activate the
diverts are automatically cancelled. However, they are activated again
when you cancel the
Tip! If you subscribe to the Alternate Line Service (ALS), you can set different
Call Diverts for the two lines, i.e. Line 1 and Line 2.
ACTIVATING CALL DIVERTS
1. Scroll to Divert ,
Y E S
2. Select the divert you want (
3. Select Activate .
4. Enter the phone number, including the area code, to which you want your
calls to be diverted and then press
Tip! If the phone number is stored in the phone book, you do no need to enter
it. Press LEFT and then recall the number.
Diverting when the Data Menus are On
If you have turned the Data menus on, you can set call diverts for your phone,
data and fax numbers respectively. To divert, proceed as described above.
.
All calls . A divert indicator in the shape of an
All calls divert.
.
,
All calls On busy
Y E S
On busy .
All calls divert, all other
, or
No reply Unreachabl
.

Diverting Incoming Calls

Unreach-
).
49