Diverting Incoming Calls - Ericsson T10s User Manual

Diverting Incoming Calls

If you want to make certain that your incoming calls are correctly handled
when you are unable to answer them, you can use the Call Divert service to
divert them to another phone number.
Note! The Call Divert service may not be available on all networks.
The Call Divert service lets you:
• divert calls if you are already on the phone,
•
divert calls that you do not answer within a specified time limit (operator
dependent),
• divert calls if your phone is turned off or if you are unreachable,
abl e.
You may use any combination of the above.
You may also:
• divert all incoming calls,
arrow is shown in the display. If you activate the
diverts become temporarily inactive. They are activated again when you
cancel the
Tip! If you subscribe to the Alternate Line Service (ALS), you can set different
Call Diverts for the two lines, i.e. Line 1 and Line 2.
Activating Call Diverts
1. Scroll to
2. Select the divert you want (
All calls
< Activate >
3. Select
4. Enter the phone number, including the area code, to which you want your
calls to be diverted and then press
Tip! If the phone number is stored in the phone book, you do not need to enter
it. Press
Checking the Divert Status
To check the status of a certain call divert
1. Scroll to
2. Select the divert you want.
44

Diverting Incoming Calls

No reply .
. A divert indicator in the shape of an
All calls
All calls divert.
, .
Divert
Y E S
All calls ,
Activate .
Y E S
and then recall the number.
L E F T
Divert , .
Y E S
On busy .
Unreach-
All calls divert, all other
On busy , No reply or Unreachable ).
.