Image 10.6 Owner's Manual page 19

Do not press the AGE
SET decrease button, or [ I-- ] the setting will change L
to the letter "C," for a
corded pulse sensor.
The setting can be changed back by pressing the
button again.
To exit the information mode, remove the key.
HOW TO ADJUST THE ANGLE OF THE CONSOLE
In order for the console to receive signals from the
pulse sensor, the console must be angled toward the
pulse sensor. Loosen the knobs on the ends of the
console crossbar, rotate the console to the proper
angle, and retighten the knobs.
/]
HOW TO ADJUST THE CUSHION LEVEL
The rear legs of the treadmill are designed to cushion
the impact as you walk or run on the treadmill. The
legs can be adjusted for a firmer or softer cushion
level using the knob on the right side of the treadmill.
Knob
For a firmer cushion level, tum the knob clockwise; for
a softer cushion level, turn the knob counterclockwise.
Note: The faster you run on the treadmill, the firmer
the cushion level should be. If the cushion level is too
soft, the treadmill will bounce excessively.
19