Image 10.6Q User Manual page 19

831.297573
Hide thumbs Also See for 10.6Q:
Table of Contents

Advertisement

b.
If the walking belt has shifted to the right, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the left rear roller adjustment
bolt counterclockwise,
and the right bolt clockwise,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key
and run the treadmilI for a few minutes. Repeat until
the walking belt is centered.
C.
If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using the
alien wrench, turn both rear roller adjustment bolts
clockwise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each side of
the walking belt 3 to 4 inches off the walking platform.
Be careful to keep the walking belt centered. Plug in
the power cord, insert the key and carefully walk on
the treadmill for a few minutes. Repeat until the walk-
ing belt is properly tightened.
PROBLEM: The heart rate monitor does not function properly
a. If the heart rate monitor does not function properly, refer to HEART RATE MONITOR TROUBLE-
SHOOTING on page 6.
b. The CR 2032 battery may need to be replaced.
If the heart rate monitor still does not function properly, the battery
should be changed. To replace the battery, locate the battery cover
on the back of the sensor unit. Insert a coin into the slot in the cover
and turn the cover counterclockwise
to the "open" position. Remove
the cover.
Remove the old battery from the sensor unit. Insert a new OR 2032
battery, making sure that the writing is on top. In addition, make sure
that the rubber gasket is in place in the sensor unit. Replace the bat-
tery cover and turn it to the closed position.
I
_t_r:r
PROBLEM: An error code (El, E20, E21, E22, E23, OR E24) appears on the console
a. If an error code appears, remove the key from the console, wait for a moment, and then reinsert
it. If the error code appears again, catI our Customer Service Department. Do not use the tread-
mill until the problem is corrected.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

831.297573

Table of Contents