Ericsson R250s PRO User Manual page 18

No network
13:40
MENU
L L L L R R R R
Clock
CLOCK
L L L L Set Clock R R R R
(14:16)
SET CLOCK
(14:16)
_ –: – –
No Network
If the message No network is displayed, there is no network within range or
the received signal is too weak. You have to move to get a stronger signal. You
can also try to replace the antenna with the longer high gain antenna.
INITIAL SETTINGS
The first time you turn on your phone, you may want to change the language
in the display, set the clock and choose the ring signal type. For more informa-
tion about these settings, see "Personalizing Your Phone" on page 46.
Display Language
Most modern SIM cards automatically set the display language to the lan-
guage of the country where you bought your SIM card. If this is not the case,
the default language is English.
If your phone displays a language that you do not understand, you can change
it to English at any time. For more information on how to change the display
language, see "Display Language" on page 46.
To change the language to English
1. Press the key.
C L R
2. Press the arrow key.
L E F T
3. Enter 0000.
4. Press the
R I G H T
For information about the keys, please see "Key Functions" on page 18.
Setting the Time
The time is shown at the bottom of the display. When you buy your phone, the
time is not normally set.
To set the time
1. Press the or
L E F T
2. Press to enter the clock menu.
Y E S
3. Press the
R I G H T
4. Press to enter the Set clock function.
Y E S
5. Enter the correct time in hours and minutes, using the number keys.
6. Press to confirm your choice.
Y E S
7. Press to return to standby mode.
C L R
Note! The time is by default presented in the 24-hour format. If you prefer the
12-hour format, you can change the setting.
arrow key.
arrow key until the
R I G H T
arrow key until Set clock
Turning Your Phone On and Off
Clock menu appears.
appears.
15