Selectan Option - Nikon D3200 Reference Manual

II "Cleanat Startup/$hutdown"
Choose from the following options:
Option Description
The image sensor is automatically cleaned each time the camera is
L_ON Clean at startup turned on.
Clean at The image sensor is automatically cleaned during shutdown each
L_OFF
shutdown time the camera is turned off.
Ao. Clean at startup & The image sensor is cleaned automatically at startup and at
®o_F
shutdown shutdown.
Cleaning off Automatic image sensor cleaning off.
Select Clean image sensor in the setup
menu.
Press the MENU button to display the menus.
Highlight Clean image sensor in the setup
menu (_ 133) and press i_.
i
MENU button
2
Select Clean at startup/shutdown.
Highlight Clean at startup/shutdown and
press I_.
3 Selectan option.
Highlight an option and press _).
I_ Image Sensor Cleaning
Using camera controls during startup interrupts image sensor cleaning. Image sensor
cleaning may not be performed at startup if the flash is charging.
Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using
the options in the Clean image sensor menu, clean the image sensor manually (_ 182) or
consult a Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession, image sensor cleaning
may be temporarily disabled to protect the camera's internal circuitry. Cleaning can be
3erformed again after a short wait.
181