Nikon D3200 Reference Manual page 51

This item is used to adjust settings for optional GP-1 GPS units. The GP-1 can be
connected to the camera's accessory terminal (_ 177) using the cable supplied with
the GP-1, allowing information on the camera's current position to be recorded when
photographs are taken (turn the camera off before connecting the GP-1; for more
information, see the GP-1 manual).
The GPS menu contains the options listed below.
• Standbytimer: Choose whether the exposure meters turn offautomatically when the
GP-1 is attached.
_-Op:iio°n -'_ Description
Exposure meters turn off automatically if no operations are performed for the
time selected for Auto off timers > Standby timer in the setup menu (_ 140; to
Enable allow the camera time to acquire GPS data, the delay is extended by up to one
minute after exposure meters are activated or the camera is turned on). This
reduces the drain on the battery.
Disable Exposure meters do not turn off while the GP-1 is connected.
• Position: This item is only available if the GP-1 is connected, when it displays the
current latitude, longitude, altitude, and Coordinated Universal Time (UTC) as
reported by the GP-1.
• UseGPSto set camera clock: Select Yes to synchronize the camera clock with the time
reported by the GPS device.
Coordinated Universal Time (UTC)
UTC data is provided by the GPS device and is independent of the camera clock.
The r_! Icon
Connection status is shown by the _ icon:
• ['a_(static): Camera has established communication with GP-1.
Photo information for pictures taken while this icon is displayed
include an additional page of GPS data (_ 101).
• _(flashing): The GP-1 is searching for a signal. Pictures taken while
the icon is flashing do not include GPS data.
• No icon:No new GPS data have been received from the GP-1 for at _s_t [517t
least two seconds. Pictures taken when the _ icon is not
displayed do not include GPS data.
147