Nikon D800E User Manual page 101

II OtherGPS Units
Garmin GPS units that conform to version 2.01 or 3.01 of the
National Marine Electronics Association NMEA0183 data format
can be connected to the camera's ten-pin remote terminal using
an MC-35 GPS adapter cord (available separately; _ 390).
Operation has been confirmed with Garmin eTrex and Garmin
geko series devices equipped with a PC interface cable connector.
These devices connect to the MC-35 using a cable with a D-sub
9-pin connector provided by the manufacturer of the GPS device.
See the MC-35 instruction manual for details. Before turning the
camera on, set the GPS device to NMEA mode (4800 baud); see the
documentation provided with the GPS device for more
information.
216