II OtherGPS Units
Optional Garmin GPS units that conform
to version 2.01 or 3.01 of
the National
Marine Electronics Association
NMEA0183 data
format can be connected
to the camera's ten-pin
remote terminal
using an MC-35 GPS adapter cord (available separately; pg. 370).
Operation
has been confirmed
with Garmin eTrex and Garmin
geko series devices equipped
with a PC interface cable connector.
These devices connect to the MC-35 using a cable with a D-sub 9-
pin connector
provided
by the manufacturer
of the GPS device.
See the MC-35 instruction
manual for details.
Before turning
the
camera on, set the GPS device to NMEA mode (4800 baud).
MC-35
200