A/V Sync; Preset Name For Input Selectoro; Dynamic Volume - Onkyo HT-R591 Instruction Manual

m Dynamic Volume
_Off
Light:
Activates Light Compression Mode.
Medium:
Activates Medium Compression Mode.
Heavy:
Activates Heavy Compression Mode. This setting
affects volume the most. It quiets the loud parts, such
as explosions, and boosts the quiet parts so they can
be heard.
• ff you make Dynamic Volume active, "Dynamic EQ" is set to
"On". The Dynamic Vol indicator lights.
• When "Dynamic EQ" is set to "Off", "Dynamic Volume" is
automatically switched to "Off".
About Audyssey Dynamic EQ®
Audyssey Dynamic EQ solves the problem of
deteriorating sound quality as volume is decreased by
taking into account human perception and room
acoustics. Dynamic EQ selects the correct frequency
response and surround levels moment-by-moment at any
user-selected volume setting. The result is bass response,
tonal balance and surround impression that remain
constant despite changes in volume.
Dynamic EQ combines information from incoming
source levels with actual output sound levels in the
room, a prerequisite for delivering a loudness correction
solution. Audyssey Dynamic EQ works in tandem with
Audyssey 2EQ® to provide well-balanced sound for
every listener at any volume level.
About Audyssey Dynamic Volume®
Audyssey Dynamic Volume solves the problem of large
variations in volume level between television programs,
commercials, and between the soft and loud passages of
movies. Dynamic Volume looks at the preferred volume
setting by the user and then monitors how the volume of
program material is being perceived by listeners in real
time to decide whether an adjustment is needed.
Whenever necessary, Dynamic Volume makes the
necessary rapid or gradual adjustments to maintain the
desired playback volume level while optimizing the
dynamic range. Audyssey Dynamic EQ is integrated into
Dynamic Volume so that as the playback volume is
adjusted automatically, the perceived bass response,
tonal balance, surround impression and dialog clarity
remain the same whether watching movies, flipping
between television channels or changing from stereo to
surround sound content.
A/V Sync
Advanced Operations
m A/V Sync
_0 ms to 400 ms in 10 msec steps
When using progressive scanning on your Blu-ray
Disc/DVD player, you may find that the picture and sound
are out of sync. With this setting, you can correct this by
delaying the audio signals.
To view the TV picture while setting the delay, press
ENTER.
To return to the previous screen, press
RETURN.
The range of values you can adjust will depend on whether
your TV supports HDMI Lip Sync and if the "LipSync"
setting is set to "On" or not (_ page 50).
• A/V Sync is disabled when the Direct listening mode is used with
an analog input source.
Preset Name For Input Selector
I Name
- - -, Blu-ray, DVD, HD DVD, VCR, DVR, Tivo,
CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD,
TAPE, iPod:
To reset to the default, select "- - -".
You can enter a preset name for each individual input
selector for easy identification. When entered, the preset
name will be displayed.
• You can't assign the same preset name to multiple input selectors.
• This setting cannot be used for the AM, FM or USB input
selector.
En-47 V
©©