Panasonic Lumix DMC-FX700 Operating Instructions Manual page 89

Others
• Use a card with SD Speed Class _ with "Class 4" or higher when recording motion pictures in
[AVCHD].
Also, use a card with SD Speed Class with "Class 6" or higher when recording motion pictures
in [MOTION JPEG].
SD Speed Class is the speed standard regarding continuous writing.
• Depending on the type of the card, recording may stop in the middle.
If motion picture recording stops during use of a card of at least "Class 4" or if you use a
card that has been formatted on a PC or other equipment, the data-writing speed is lower.
In such cases, we recommend that you make a backup of the data and then format (P3I)
the card in this unit.
• Object seems to be warped slightly when the object moves across the image very fast, but this
is because the unit is using MOS for the image sensor. This is not a malfunction.
• If the subject has different colors as the periphery, set the AF area to those colors specific to
the subject by aligning that area with the AF area. (PI18)
• It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the
image might look warped because the perspective is enhanced when the wide angle is used.
This is not a malfunction.
• LCD monitor will turn off when [SLEEP MODE] (P28) of the [ECONOMY] Mode is activated.
[This does not happen when using the AC adaptor (optional).]
• This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
• This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
- 195-