Min. Shtr Speed - Panasonic Lumix DMC-FX700 Operating Instructions Manual

Advanced (Recording pictures)
For details on [REC] Mode menu settings, refer to P23.
You can take bright pictures in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes: []_
[AUTO], [1/250], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Brightness Darker Brighter
Jitter Less More
• This should usually be set to [AUTO] to take pictures. (When you select a minimum shutter
speed other than [AUTO], [MIN] appears on the screen.)
• When [AUTO] is selected, shutter speed may be set up to 1 second when there is not much
jitter to adjust with the [STABILIZER], or when [STABILIZER] is set to [OFF].
• Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
• Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in a well-lit area. If correct exposure cannot be achieved, [M=LN] will flash in
red when the shutter button is pressed halfway.
For details on [REC] Mode menu settings, refer to P23.
Pictures with sharp profile and resolution can be taken by utilising the Intelligent
Resolution Technology.
Applicable modes: [_][_
[OFF]/[ON]
[i.ZOOM]: [I.RESOLUTION] is activated, and the zoom magnification is increased
by approximately 1.3× without noticeable deterioration in the picture.
• Refer to P45 for information about the Intelligent Zoom.
• [I.RESOLUTION] is fixed to [i.ZOOM] in Intelligent Auto Mode (when [MOTION DEBLUR] is set
to [OFF]).
• This will be fixed to [ON] for [HANDHELD NIGHT SHOT] and [HIGH SENS.] in Scene Mode, to
[OFF] for the [FLASH BURST] and [PIN HOLE] in Scene Mode, and to [i.ZOOM] in all other
Scene Modes.
- 121 -