Panasonic Lumix DMC-FX700 Operating Instructions Manual page 37

Advanced (Playback)
You can use various functions in Playback Mode to rotate pictures, set protection for them
etc.
• With [TEXT STAMP], [RESIZE], [CROPPING] or [LEVELING], a newly edited picture is
created. A new picture cannot be created if there is no free space on the built-in memory or the
card so we recommend checking that there is free space and then editing the picture.
You can add text (comments) to pictures. After text has been registered, it can be stamped
in prints using [TEXT STAMP] (P1461. (Only alphabetic characters and symbols can be
entered.)
Select [TITLE EDIT] on the [PLAYBACK] Mode menu. (P23)
Touch the item.
• When you have selected
[SINGLE IN BURST GROUP] or
[MULTI IN BURST GROUP], select burst picture
group, and proceed to step 3.
Select an image to add text to.
• [_] is displayed for pictures with titles already registered.
[SINGLE] setting
| Drag the screen horizontally and select an
image.
2 Touch [SET].
• You can forward or rewind pictures continuously by
keeping your finger on the left or right sides of the
screen after forwarding/rewinding a picture.
(Pictures are displayed reduced in size.)
[MULTI] setting
| Touch a picture to select (repeat).
• Switch the screen by touching [A]/[V] if these are
displayed on the slide bar.
• Setting is canceled by touching the same picture
again.
2 Touch [OK].
[SINGLE]
[MULTI]
- 143 -