Stabilizer Function - Panasonic HDC-HS80P Owner's Manual

1
Change the mode to O • O
2
Open the LCD monitor.
3
Press the O button halfway.
(For Auto focus only)
O
4
Press the _ button fully.
Focus indication:
O Focus indication
O (The white lamp flashes.):
Focusing
• (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful.
Q Focus area (area inside brackets)
• If you set the Optical image stabilizer function (-,) 50) to _1 ([MODE1]), then the Image
Stabilizer function will be more effective. ( MEGAi (MEGA Optical Image Stabilizer) will be
displayed when the _ button is pressed halfway.)
• In dark environments, the Photo light will flash. (-) 57)
• Focus indication will change to registered focus icon when [FACE RECOG.] is set to [ON].
(-) 64)
• Using a Photo light or tripod is recommended when recording still pictures in dark places
because the shutter speed becomes slow.
• The screen will become darker when the _ button is pressed halfway if the shutter
speed is 1t30 or slower.
• You can also take a picture just by touching the subject to focus. (Touch Shutter: -,) 53)
• To print a picture, save the picture to the SD card (-) 98) and print using a PC or a printer.
34
VQT3J15