Table of Contents
Advertisement
Settings for Tape Playback
1 Set VCRFFV selector to VCR
2, Set TV channel selector to the output channel of Converter Box.
3 Set Converter Box channel selector to VCR output channel (channel 3 or 4).
[5]
IALTERNATE
CABLE
[_ CONNECTION
WITH TWO CONVERTER/DESCRAMBLER
BOXES
If you want to record and view combinations of scrambled/unscrambled channels, you will need additiona'
equipment. A typical connection using two converter boxes, an A!B Switch, and a 2-Way Splitier is showr_ be_
2-Way
Splitter
CATV Input
Cable TV
Converter
Box #1
A/B Switch
I
Settings for Recording
and TV Viewing
1. Set VCR channel selector tO the output channel of Converter #1.
2 Select channel to be recorded on Converter #1.
To view the channel being recorded:
• Set VCR,_'V selector to VCR
• Set A!B Switch to position A
• Set TV channel selector to VCR output channel (channel 3 or 4).
NOTE: • These settings are also used to view playback of a tape.
• Converter
Boxes, Splitters and Cables shown are not supplied.
To view a different
channel:
• Set A'B Switch
to posibon
B
• Se! T,J channel
selector
to output
channel
of Converter
#2
• Select
channel
to be wewed
on converter
#2.
Advertisement
Table of Contents
