To Playback - Panasonic Omnivision VHS PV-4820 Operating Instructions Manual

To
PLAYBACK
Be sure the PREPARATIONS on page 1 have been completed before proceeding to step 1 below.
ATTV
Turn"IV on end
select its VCR
channel.
The TV's VCR Channel is
CH3 or CH4.
AT VCR
Insert cassette.
The Power will come on
automatically.
When the record tab is
missing, the cassette will
_e played back
automatically. (In this case
skip step 3.)
If a cassette is already in
the VCR, just press the
POWER Button ON.
START PLAYBACK STOP PLAYBACK
3 'LAY
Press the STOP
Button.
VCR/TV
SELECTOR
BuI"rON
POWER ON;
SELECT THE
VCR CHANNEL
CASSETTE
SPECIAL EFFECTS IN PLAYBACK MODE (BEST IN SP & SLP SPEED: SOUND IS MUTE';
TO RAPIDLY LOCATE
A PARTICULAR SEGMENT
• Prees theSEARCH Button.
This starts a rapid forward or
reverse visual search.
•
Pr_t_e SEARCH Button again
or the PLAY Button to return to
playback.
SEARCH SPEED
SP Search is about 7 times
normal speed
SLP Search is about 21 times
normal speed
TO VIEWADOUBLESPEED
PLAYBACK PICTURE
• During playback, press the X2
Button on the Remote Control.
x2
• Press button once more to
release the tape from a double
speed playback.
TO VIEW AN INSTANT SEARCH
• During playback, press the
FRAME ADVANCE Button.
This starts rapid forward search
for several seconds and the
playback continues automatically.
-9-