Preparation Before Operation; Indoor Unit - Panasonic CS-C18B KP Operating Instructions Manual

. • • i• •¸¸' • • •
PREPARATION BEFORE OPERATION
• Indoor Unit
1 Open the front panel
2
Remove the air filters
3
Fit the air purifying filters in place
4 Insert the air filters
5 Close the front panel
• Remote Control
- To set the current time
1
Press IT].
2 Then press [] to increase or decrease the time.
3 Press [] again,
Set time at display wiJllight up.
HOW TO OPERATE
• To start the operation
• Press [].
• POWER indicator (green) on the indoor unitwill light
up,
• To stop, press once more.
• Setting Mode
• Press [] to select:-
AUTO - Automatic Operation
COOL - Cooling Operation
DRY - Soft Dry Operation
FAN - Air Circulation Operation
• Setting Temperature
• Press [] to increase or decrease the temperature.
• The temperature can be set between 60°F ~ 86°F.
• Recommended temperature: •
COOL
75°F ~ 78°F
2°F ~ 4°F
DRY
Lower than the
room temperature
• During AUTO Operation, press [] to select:-
• Operation with 4°F higher than the standard
temperature.
• Operation with the standard temperature.
• Operation with 4°F lower than the standard
temperature.
• Standard Temperature
Indoor Standard
temperature Operation temperature
SoftDry 72°F
• Once the Automatic Operation is selected, the
indoortemperature sensor operates automatically
to select the desired operation mode with Cooling
or Soft Dry.
• After the operation mode has been selected, the
mode does not change.