Tones - GE Monogram Wall Oven Owner's Manual

Oven Control, Clock & Timer
14%II Oven
BAKI
?
Doubleovencontrolshown.(Appearance m ayvary.)
l' atures of
yO_Llr O_CTI
control,
clock and
timo
1 BAI_]. Press to select the bake flmction. 9
2 BROIL HI/LO. Press to select the broil
fimction. 10
3 CONVECTION BAKE. Press to select
baking with convection.
11
4 CONVECTION ROAST. Press to select
roasting with convection.
5 PROOE Press to select a warm environment
useflfl for rising )east-leaxened products. 12
6 START. Must be pressed to start anv
cooking or cleaning flmction.
7 DISPLAY. Shows the operations you have
selected, the time of day and the cooking
or cleaning status.
If "F mad a number or letter" flash in the
display and the oven control signals, this
indicates fimction error code. Press the
CLFAR/OFF pad. Mh)w ()veil to cool for
one hour. Put the oven back into operation.
If flmction error code repeats, disconnect
power
to the oven and call for service.
8 OVEN LIGHT ON/OFE Press to turn the
oven lights on or off.
13
14
15
16
PROBE. Press when using the probe to
cook fl)od.
SELF CLF._q. Press to select the self
cleaning fimction. See the Using the
SeltLCleaning Oven section.
DELAY START. Use ahmg with the
COOK TIME or SELF CLFAN pads to
set the oven to start and stop automatically
at a time you select.
COOK TIME. Use tot Timed Bake, Timed
Convection Bake and Timed Convection
Roast operations.
CLF, a,R/OFE Press to cancel any ()veil
operation ex(ept the clock and timer.
CLOCK. Press to enter the time of day.
NUMBER PADS. Use to set anv flmction
requiring numbers--for example, the time
of day on the clock, the timer, the oven
temperature, the internal fi)od teml)erature,
the starting and length of cooking time for
Timed Bake and the starting and length of
cleaning time for Sell=Clean.
TIMER ON/OFF. Press to select the timer
flmction. The timer does not control oven
operations. The timer can time up to
9 hours and 5(.) minutes.
7bnes
The control has a series of tones that will
sound at different times. These tones may
st)lind
while vou set the control for an oven
flmction or at the end of the oven function.
They will also alert vou when an incorrect time
or temperature has been entered or if there
is a problem with the oven.
When vou press a touch pad you will hear a
beep. This beep will let you know you have placed
enough pressure on the pad to activate it.
When vou set an oven temperature the
oven automatically starts to heat, When the
temperature inside the oven reaches vour,
set temperature a tone will sound to let you
know to place the tood in the oven.
An attention tone will sound if vou set an
invalid flmction or try to set an additional
flmction. The tone can be quickly identified
by watching the display messages.