Macintosh - Epson 600 User Manual

The EPSON Perfection 600 Main Window
Note:
You usually need to
select the scanner only
once, the first time you
use the scanner with
your software. The
procedures may vary
depending on your host
application; see your
application user's guide
for details.
2. Choose your EPSON scanner as the image source.
For example, in PaperPort choose Select Source
from the File menu. Highlight Perfection 600
(32 Bit) from the Select Source list, then click
Select.
3. Open the scanner software.
For example, from PaperPort choose Acquire from
the File menu or click the scanner icon on the tool
bar. The EPSON Perfection 600 main window
appears.
You're now ready to scan.

Macintosh

To access the main EPSON scanner software window,
first copy the Perfection 600 plug-in module from the
EPSON Perfection 600 folder on your hard drive to the
plug-ins folder for your application.
Once that is done, follow these basic steps:
Page 11