Epson 600 User Manual page 102

Basic Scanning
Note:
Zooming only changes the
way the image appears in
the preview area of the
main window—it does not
change the size of
the scanned image.
For information about
how to resize an image,
see Sizing the Scanned
Image.
Caution:
Do not click Reset to
cancel a zoom. Clicking
Reset cancels all pending
changes to the image.
Perform the following steps to zoom in or out of an
image:
1. Click the Zoom button. The mouse cursor will turn
into a magnifying glass with a plus (+) symbol.
2. To zoom in, click on an area of the image with the
left mouse button. That area is enlarged.
3. To zoom out, either hold down the Shift key and
click on the area, or click on the image with the right
mouse button. (The magnifying glass mouse cursor
displays a minus (–) symbol when the Shift key is
pressed, indicating zooming out is activated.)
4. To turn off the zoom feature, click the Zoom button
again.
To reset the image to its normal size, zoom out (or in)
until the image displays as normal.
Page 23