Table of Contents
Advertisement
[ Enter] key or [weighing] key to exit. If it is incorrect, using digital keys enters
new date , then press [ Enter ] key.
（2） Under weighing status of the indicator, press [ Time ] key, and Time sign lamp is
lighted. Indicator display original Time data at this time. If it is correct, then press
[ Enter ] key or the [ weighing ] key to exit. If it is incorrect, using digital keys
enters new time data, then press [ Enter ] key.
4.8 Weight data store, check and clear
1 Data storing.
（1） After weighing display becoming stable, press [ Store ] key, At this time,
indicator will store weight value store into internal memory and accumulats it.
（2） At the same time, displaying [ LoAd ] for fifteen seconds to prompt operator.
（3） Negative or zero weight value can't be stored.
（4） Indicator can store:total accumulated times. total accumulated weight value, and
200 groups of weighing records.
（5） When print control "Auto" is set to " 1", system not only auto-prints, but also
auto- stories and auto-accumulates weighing data.
2 Checking
Press [ Check ] key, to check the weight record data in internal memory of the Indicator.
Including: Total accumulating times, Total accumulating weight value, and every group of
weighing record.
Operating as following:
Step
Operating
1
press [ Check ]
press [ Check ]
press [ Check ]
2
press [ Check ]
press [ Check ]
press [ Check ]
press [ Check ]
press [ Check ]
press [ Check ]
press [ check ]
.........
☆ Checking ends, Indicator auto-returns to weighing mode, and using [weighing ] key,
you can quit checking mode.
X K 3 1 9 0 - A 1
Display
[
**** ]
n=Total accumulating times
[ H *** ]
H=Total accumulating weight High 3
bits
[L ***** ]
L=Total accumulating
weight low 5 bits
[no 001]
First group of weighing
[ dt **** ]
Date (M.D)
[ t **** ]
Time (H.m)
[A *****]
Gross
[P ***** ]
Tare
[n ******]
Net
[no 002 ]
.........
symbols record
+P
Explanation
sign symbols record
The second group of weighing sigh
Hide quick links:
Advertisement
Table of Contents
