Sharp MD-MT180H Operation Manual page 200

Checking Displays (continued)
MD-MT180H
ENGLISH


To display the playing time of an individual
track
1
Whilst in the stop mode, press the
ton to display the track number and track name.
Track number
Track name
2
Press the MENU/CHRG button repeatedly to se-
lect "DISPLAY".
3
Press the ENTER/SYNC button.
4
Press the MENU/CHRG button to select the play-
ing time.
Playing time
Each time the or button is pressed, the play-
ing time of the previous or next track will be dis-
played.
E-25


Checking the remaining amount of battery
level
The remaining amount of battery level is shown by the
battery indicator ( ) during operation.
or but-
How to read the battery indicator
When the battery
level is high


When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery.


When the battery has run out completely, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:


If you use the battery which you stopped charging
halfway, " " may appear. It does not mean that the
battery is completely charged.


The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.


When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.


The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
01/10/5
When the battery
level is very low
180H_E_4.fm