Main Features Of The Ar-S11; Part Names; Specifications - Sharp AR-S11 Operation Manual

MAIN FEATURES OF THE AR-S11

The 20-bin sorter allows you to sort copies into collated sets (sort mode), or group them by original page.
When installed on an AR-C260 Series machine, sets of up to 20 full-colour copies can be made in sort mode.

PART NAMES

Sort bins
Copies are delivered to
these bins.
CAUTIONS
G Do not put pressure on the sorter or subject it to undue force (particularly the sort bins).
G Do not place your hands on the sorter during copying because the sorter moves up and down.
NOTES
G To install the 20-bin sorter, a duplex bypass/inverter unit and either a stand/1 x 500 sheet paper drawer, a stand/
3 x 500 sheet paper drawer, or a duplex module/2 x 500 sheet paper drawer must also be installed.
G In printer mode, output is only possible to the top bin.

SPECIFICATIONS

Name
Number of bins
Paper output
Bin capacity
Paper size
Paper weight
Power supply
Dimensions
Weight *
2
20-BIN SORTER AR-S11
20
Face down output (however, face up output in non-sort mode when using paper other
than plain paper or heavy paper 1 (paper weight: 106 to 200 g/m
See the next page.
Non sort mode: Max. A3W (12" x 18")
Min. A5 (7-1/4" x 10-1/2"R)
Sort and group mode: Max. A3 (11" x 17")
Min. A5 (8-1/2" x 5-1/2")
Non sort mode: 64 to 300 g/m
that can be fed according to the paper feeding specifications of
the machine.)
Sort and group mode: 64 to 105 g/m
two sheets of Heavy Paper 1 (paper weight: 106 to 200 g/m
28+ to 54 lbs.) can be held in each bin in COVERS mode.)
Supplied from machine (Stand/paper drawer)
519 mm (W) x 545 mm (D) x 820 mm (H) (20-7/16" (W) x 21-15/32" (D) x 32-19/64" (H))
Approximately 28kg (61.8 lbs.)
Sorter release button (See page 6)
If a misfeed occurs in the 20-bin sorter,
press this button to open the space
between the sorter and the machine.
2 (17 to 80 lbs.) (Plain paper and special paper
2
(17 to 28 lbs.) (Plain paper only; however, up to
*without mounting kit
2 or 28+ to 54 lbs.))
2
or