Maintenance; Error Indicators And Warnings; Specifications - Sharp HT-SB400 Operation Manual

Maintenance

HT-SB400
■ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may
damage the cabinet finish.
●
Do not apply oil to the inside of each component. It may cause
malfunctions.

Error indicators and warnings

When you fail to perform operations properly, the following messages are
displayed on the speaker.
Display
or
or
On/Stand-by indicator
(blinks red)
(*): Should the same message appear even if the speaker is unplugged and
plugged in, or is set to the stand-by mode and on again, contact your
18 local dealer where you purchased the speaker.
ON/STAND-BY ON/STAND-BY NEWS CINEMA/GAME NEWS CINEMA/GAME SPORT SPORT STANDARD STANDARD FUNCTION FUNCTION VOL VOL VOL VOL
SOUND BAR SYSTEM HT-SB400 SOUND BAR SYSTEM HT-SB400
Meaning
●
Malfunction of the surround
or
circuit. Place the speaker away
from noise source and plug the
AC power lead into another wall
socket. (*)
●
When the protection circuit of the
amplifier is activated.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right
to make design and specification changes for product improvement without
prior notice. The performance specification figures indicated are nominal
values of production speaker. There may be some deviations from these
values in individual speaker.
■ General
Power source DC IN 12V
(AC 100 - 240 V ~ 50/60 Hz)
Power Power on: 12 W
consumption Power Stand-by: 0.6 W (*)
Output power Front Speaker:
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Centre Speaker:
RMS: 7 W (10% T.H.D.)
RMS: 6.5W (0.9% T.H.D.)
Subwoofer:
RMS: 15 W (10% T.H.D.)
RMS: 9.8 W (0.9% T.H.D.)
Speaker 3.1-way Speaker System
Front Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 12 ohms / Channel
Centre Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 6 ohms
(12 ohms x 2 parallel connections)
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Impedance: 3 ohms
(12 ohms x 4 parallel connections)
Audio output Subwoofer Pre Out: 10 k ohms
terminals
Input terminals Analogue input (LINE 1): RCA type x 1pair (L/R)
500 mV/47 k ohms
Analogue input (LINE 2): Stereo mini socket Ø 3.5 mm
100 mV/47 k ohms
Dimensions Width: 985 mm (38-3/4")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight 2.15 kg (4.74 lbs.)
(*) This power consumption value is obtained when in the touch sensing off
mode (RED).
4A: AC/DC adaptor