Maintenance; Error Indicators And Warnings - Sharp HT-SB200 Operation Manual

Maintenance

■ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
●
Do not apply oil to the inside of each component. It may
cause malfunctions.

Error indicators and warnings

When you fail to perform operations properly, the following
messages are displayed on the speaker.
Display
●
or
or
●
Power indicator (blinks red)
(*): Should the same message appear even if the speaker is
unplugged and plugged in or is set to the stand-by mode
and on again, contact your local dealer where you
purchased the speaker.
Meaning
Malfunction of the surround
circuit. Place the speaker away
from noise source and plug the
AC power lead into another wall
socket. (*)
When the protection circuit of the
amplifier is activated.
HT-SB200
17