Sharp AR-PB2 Operation Manual page 52

PRINTER TROUBLESHOOTING
Problem: Stapling cannot be performed.
Check: Is face down selected?
Solution: Select face up for stapling. (page 23)
Check: Different sized papers used?
Solution: Stapling cannot be performed on different sized papers. (page 23)
Check: Is the paper size acceptable for stapling?
Solution: Check the acceptable paper sizes for stapling referring to the copier operation manual.
Problem: Stapling cannot be performed on the desired location.
Check: Is the desired location acceptable?
Solution: Stapling positions are limited. Check the locations. (page 23)
Problem: Misfeed or loading paper message appears.
Check: Did a paper misfeed occur, or did the paper in the selected tray run out?
Solution: Clear the error referring to the copier operation manual.
Problem: Misfeed during cover sheet printing
Check: 2-sided printing for covers using heavy paper?
Solution: Use appropriate paper. See the copier operation manual for paper specifications.
Problem: Printer write error occurs when using the printer as a local printer.
Check: Is the timeout time short?
Solution: Set a longer time in the timeout settings under the Details tab. (Windows)
Even if a longer time is set, printer write error may occur when copying is being performed.
NOTE
Problem: A notice page is printed.
Check: Does the number of pages exceed the memory capacity limit?
Solution: Increase the memory for printer using the key operator program "Memory Reserved for
Printer". (page 37)
Problem: Printed sheets will be output to the top tray when another tray is specified.
Check: Is the selected paper size proper for the specified output tray?
Solution: Check the acceptable paper sizes to the specified output tray referring to the copier
operation manual.
NOTES If there is insufficient toner in the printer, the 'Add Toner' message will normally be displayed.
If you cannot resolve a printing problem using the information in this chapter, contact your authorized Sharp service
center.
46