Sharp AR-PB2 Operation Manual page 2

Before Reading This Manual
This operation manual was written for the AR-PB2 Printer Expansion Kit with floppy disks for
installation of printer drivers.
With the latest version of the AR-PB2 Printer Expansion Kit, the printer drivers are supplied with a
CD-ROM and therefore the installation method is different from this manual. A separate
supplement manual is provided to describe the new installation method. Also some additional
features are provided with the latest version. These features are also described in the supplement
manual.
The separate supplement manual describes the following items.
Installing printer drivers from the CD-ROM
PCL6 printer driver
Printer driver for Macintosh
Printer Status Monitor
Printer Administration Utility
NW Setup
Additional printer configuration menu and key operator program
List of the Applicable Models for the AR-PB2 Printer Expansion Kit
(as of October, 1999)
Model Name
AR-250
AR-280*
AR-281
AR-285*
AR-286
AR-335*
AR-336
AR-405
AR-505
Some units of the models marked with (*) may come with a 1GB hard disk drive.
The specifications, features, and options of the printer described in this operation manual were
written based on the models AR-280, AR-285, and AR-335 with the printer drivers supplied in
floppy disks. The details of these may vary with the printer models.
Hard Disk Drive
Yes / No
No / Option
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Capacity
(1 GB)
2 GB
2 GB
2 GB
2 GB
2 GB
2 GB
2 GB
2 GB
CINSE1779FC51