Installing The Ps Display Fonts - Sharp AR-NB2 Setup Manual

INSTALLING THE PS DISPLAY FONTS

The fonts used by the PS printer driver are contained in the "PRINTER UTILITIES" CD-ROM that
accompanied the PS3 expansion kit (AR-PK1). Install these fonts as needed for the PS printer driver.
1
Insert the PS3 expansion kit AR-PK1
PRINTER UTILITIES CD-ROM into your
computer's CD-ROM drive.
If your computer is configured for auto
start on the CD-ROM, proceed to step 4.
2
Click the "start" button, click "My
Computer" ( ), and then double-click
the CD-ROM icon (
In Windows 95/98/Me/NT 4.0/2000,
double-click "My Computer", and then
double-click the CD-ROM icon.
3
Double-click the "setup" icon (
If the language selection screen
Note
appears after you double click the
"setup" icon, select the language that
you wish to use and click the "Next"
button. (Normally the correct language
is selected automatically.)
4
Select the "PS Display Font" checkbox
and click the "Next" button.
Do not select "PS Printer Driver".
Caution
The PS printer driver for the
machine should only be installed
from the CD-ROM that accompanies
the network expansion kit.
).
).
- 22 -
INSTALLING THE SOFTWARE
5
Follow the on-screen instructions.