Clearing A Program Key; Using A Program Key - Sharp FO-1530 Operation Manual

all-fo1530a.book Page 83 Tuesday, December 5, 2000 2:07 PM

Clearing a Program Key

To clear a Program Key, follow these
steps:
1
Press these keys:
FUNCTION
7
PRG.ENTRY MODE
2
Press 2 to select CLEAR.
2
3
Press the Program Key you want to
clear.
16/P1
35
4
Press the START key and then the
STOP key.
START

Using a Program Key

A programmed operation is
performed as follows:
1
Load the document.
2
To cancel a programmed
timer operation
(Example)
1
STOP
2
Entering and Using Programs
Press the appropriate Program
Key.
16/P1
35
(Example)
Note: A maximum of 2 timer
operations can be set at any one
time, including both timer operations
set by pressing a Program Key and
operations set as described in "Timer
Operations" in this chapter
If a Program Key has been pressed
for a timer operation and you need to
cancel the operation before it is
performed, follow these steps:
Press the Program Key.
16/P1
35
(Example)
Press the START key.
START
83