Setting Of Scene Change Detection - Panasonic WV-CF344 Operating Instructions Manual

Step 6
Move the cursor to "Level". Use the [RIGHT] or [LEFT] button to adjust the level.
Repeat step 5 and 6 to adjust to optimal level.
Step 7
Move the cursor to "DWELL TIME ". Select the dwell time from the following.
2 S (default)/5 S /10 S /30 S
Alarm signal will be issued once a continuously moving object is detected within the specified
time.

Setting of scene change detection

This function detects a change in the subject state that occurs by covering the camera with a
cloth, a cap, or others, or by changing the camera direction largely.
Follow the procedure below.
"CAMERA SETUP" screen
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
D&N(ELE) OFF
VMD SCENE CHANGE
RET TOP END
Step 1
Move the cursor to "VMD". Use the [RIGHT] or [LEFT ] button to select "SCENE CHANGE".
18