Replacing Consumables; Replacing The Batteries; Lamp Replacement Period - Epson PowerLite S4 User Manual

Replacing Consumables

Replacing Consumables
This section explains how to replace the remote control batteries, the lamp,
and the air filters.

Replacing the Batteries

If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are getting low. Replace the batteries. Have two spare AAA-size
alkali batteries ready to use when required.
1 Remove the battery cover.
While pushing the catch of the battery compartment cover, lift the
cover up.
Catch
2 Insert the batteries.
Check the positions of the (+) and (–) marks inside the battery holder
to ensure that the batteries are inserted the correct way.
3 Replace the battery cover.
Press the battery compartment cover until it clicks into place.

Lamp Replacement Period

It is time to replace the lamp when:
• The message "Replace the Lamp." appears on the screen when
projection starts
• When the Lamp indicator is flashing orange
A message will be displayed.
Flashing orange
40