Table of Contents
Advertisement
Recording to a cassette tape (continued)
CD-E650E
! Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1
2) button until "TAPE 1" appears on
the display.
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the
/
button to start dubbing.
To stop dubbing:
Press the
button.
TAPE 1 and TAPE 2 will simultaneously stop.
! Erasing recorded tapes
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (1
2) button until "TAPE 2" appears on the dis-
play.
3 Press the REC PAUSE (TAPE-2
4 Press the
/
button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
26
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
Sleep operation:
The radio, compact disc and cassette tape can all be turned off
automatically.
) button.
03/1/28
CD-E650E(A)3.fm
Advertisement
Table of Contents
