Making Copies; Normal Copying - Sharp AR-M201 Operation Manual

3
Chapter 3

MAKING COPIES

This chapter explains basic copying functions.

NORMAL COPYING

Using the document glass
Note
1
Open the original cover/RSPF, and place the original face down
on the document glass.
[How to place the original]
Align the original with the original scale and the
centring (
2
Gently close the original cover/RSPF.
By factory default, when a copy is made with
the original cover/RSPF cover open, the
function for preventing excessive toner use
activates and "CHECK ORIGINAL" appears
in the display. (See the "Check original
cover/RSPF open function" (p.14).)
3
Select the number of copies and any other copy settings, and
then press the [START] key (
Note
Copying books or originals with folds or creases
Press down on the original cover/RSPF while
copying as shown. If the original cover/RSPF is not
completely closed, shadows may appear on the copy
or it may be fuzzy. Straighten originals that have
folds or creases before placing it on the document
glass.
20
• The document glass can scan up to 216 mm x 356 mm (8-1/2" x 14") original.
• When a copy is made, the edges will not be copied (image loss). For
the image loss, see the "SPECIFICATIONS" (p.82).
) mark.
• To stop copying in the middle of a run, press the [CLEAR] key (
• For the copy settings, see pages 23 through 35.
Original scale
).
mark
).