Sharp AR-M201 Operation Manual page 58

USER SETTINGS
Program
number
11
12
13
14
15
16
17
18
56
Program name
2-SIDED COPY
MODE
MARGIN WIDTH
MEM. FOR
PRINTER
AUTO KEY
REPEAT
KEY PRESS TIME
KEY TOUCH
SOUND
SOUND AT
DEFAULT
TONER SAVE
MODE
Setting codes
(factory default
setting appears
in bold)
• If the memory fills up when two-
1: HI-SPEED
2: NORMAL
1: 5 mm (1/4")
• Use this setting to set the
2: 10 mm (1/2")
3: 15 mm (3/4")
4: 20 mm (1")
1: 30%
• Use this to change the
2: 40%
3: 50%
4: 60%
5: 70%
• Use this setting to select
1: ON
2: OFF
• Use this setting to select how
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
1: LOW
• This sets the volume of beep
2: HIGH
3: OFF
• Use this to sound a beep
1: ON
2: OFF
• This mode reduces toner
1: ON
2: OFF
Explanation
sided copying is performed,
"NORMAL" can be selected to
make copying possible.
However, "NORMAL" results in a
slower copying speed. Normally
"HI-SPEED" is selected to
enable fast two-sided copying.
margin width.
proportion of machine
memory used for printer
mode.
whether or not holding down a
key causes repeated input of
the key. For keys that normally
cause a set value to decrease
or increase when held down
(for example, the [
( ) or [ ] key (
program can be used to have
the set value not change
when the key is held down.
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
signals. (p.60)
when a base setting is
selected. (p.60)
usage by about 10% when
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
] key
)), this