Fax Modes - Sharp AR-M161 Operation Manual

BEFORE USING THE PRODUCT
Display (base screen)
Example: Copy mode
(1) (2)
Ready to copy.
AUTO
100%
A4
(5)
* The display shown is the AR-M206/AR-M207 (when the
optional RSPF is installed) display.
(1) Exposure display
Indicates the selected exposure mode.
(2) Special function icon display
Icons of enabled special functions will appear.
(3) Message display
Messages are displayed regarding machine
status and operation.
(4) Original size display
The size of the placed original and the icon of the
original scanning mode will appear.
: One-sided scanning in the SPF.
: Scanning on the document glass
: Two-sided scanning in the RSPF.
OPERATION IN COPY, PRINT, SCAN, AND FAX MODES
Some operations in the various modes of the machine cannot take place simultaneously.
Interrupting operation
Interrupted operation
Copying Output
Printing Output
Scanning Scanning an original No
Scanning an original No
Faxing
Output
*1 Can be used after pressing the [INTERRUPT] key (
*2 After the page that is currently being printed is output, the job is interrupted.
*3 Only possible when the computer is connected to the USB-2 port.
*4 Only possible when the computer is connected to the parallel port or USB-1 port; the job is interrupted after the page that is
currently being printed is output.
*5 After output of the page that is currently being printed via the parallel port or USB-1 port, the job is interrupted.
• Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
Note
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the SPF, printing will not be possible until the misfed original is removed and
the SPF is ready for use.
16
(3) (4)
A4
AUTO
(6) (7)
Copy output
1
Yes*
2
Yes*
2
Yes*
Icons appearing in the special function icon display
1-sided to 2-sided
copy
2-sided to 2-sided
copy
2-sided to 1-sided
copy
Sort function*
Margin shift copy*
Edge erase copy*
* These only appear when the dual function board is
installed.
(5) Copy ratio display
Displays the copy ratio for reduction or
enlargement.
(6) Paper size display
Displays the selected paper size. When "AUTO"
appears, the most suitable size of paper is
automatically selected.
(7) Paper tray display
The selected paper tray is highlighted.
Printing Scanning
No No
4
Yes*
No
3
Yes* No
2
No Yes*
).
Centre erase
copy*
Edge + Centre
erase*
2 in 1 copy*
4 in 1 copy*
Dual page copy
Card shot*
Faxing
Printing
Scanning
faxes
originals
No No
5
Yes* No
No No
Yes
Yes