Loading Paper; Paper - Sharp AR-M161 Operation Manual

BEFORE USING THE PRODUCT
Default settings
The machine is set at the factory to return all settings to the default settings one minute after a copy job is finished
(auto clear function) or when the [CA] key is pressed. When the settings return to the default settings, any functions
that were selected are cancelled.
The auto clear time can be changed in the key operator programs. (Page 83)
In the default state the display shown below appears. The default state of the display may vary depending on
settings in the key operator programs.
Ready to copy.
A4
AUTO
100%
A4
AUTO
* The screen is that of the AR-M206/AR-M207 (when the RSPF is installed).

LOADING PAPER

The message "TRAY< >:Add paper." will be displayed when there is no copy paper in the selected paper tray.
(< > is the tray number.) Load paper in the indicated paper tray.

PAPER

The specifications for the types and sizes of paper that can be loaded in the paper trays are shown below.
Paper tray Tray No.*
Tray 1 1
Tray 2 2
Tray of
250-sheet 2 or 3
paper feed unit
Tray of 2 x 2 or 3
250-sheet
3 or 4
paper feed unit
Bypass tray
*1 A5 (5-1/2" x 8-1/2") can be used in tray 1 but cannot be used in other trays (including trays in optional paper feeding unit).
*2 When making a large number of copies or prints using 90 g/m
when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to accumulate.
*3 The number of sheets of the paper which can be set changes with the weight of a paper. (The indicated numbers are for 80
2
g/m (20 lbs.) paper.)
*4 The trays are numbered 1, 2, 3, and 4 from the top.
Paper that can be used for automatic 2-sided printing
Paper used for automatic two-sided printing must meet the following conditions:
Paper type: Plain paper (special paper cannot be used.)
Paper size: Standard sizes (A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R)
2
Paper weight: 56 g/m to 90 g/m
18
4
Paper type
A5*
B4, A3
(5-1/2" x 8-1/2"*
Standard paper
8-1/2" x 11" (Letter), 8-1/2"
Recycled paper
x 11"R, 8-1/2" x 13"
(Foolscap), 8-1/2" x 14"
(Legal), 11" x 17" (Ledger))
Standard paper
Recycled paper
A6R to A3
Thick paper (5-1/2" x 8-1/2" (Invoice) to
11" x 17" (Ledger))
Transparency film
Labels
International DL (110 mm x
220 mm), International C5
(162 mm x 229 mm)
Envelopes
Commercial 9 (3-7/8" x
8-7/8"), Commercial 10
(4-1/8" x 9-1/2")
2
(15 lbs. to 24 lbs.)
Paper size
1,
B5, B5R, A4, A4R,
1
(Invoice),
56 g/m
(15 lbs. to 24 lbs.)*
56 g/m
(15 lbs. to 20 lbs.)
Max. 200 g/m
(54 lbs.)
2
(24 lbs.) paper, remove the output from the paper output tray
Weight Capacity
250 sheets (80
2
(20 lbs.))*
g/m
2 2 2
to 90 g/m *
(Load paper lower
2
than the line on
the tray)
2 2
to 80 g/m
100 sheets*
2
Load one sheet of
these papers at a
time to the bypass
tray.
5 sheets
3
3