Dvd-Rw(Video Format)/Dvd-R Playback; Dvd Video Playback - Sharp DV-HR400F Operation Manual

DVD/CD Playback
70
GB
DVD-RW (Video format)
/DVD-R Playback
Playback from begin-
ning
1
Press DVD to select DVD mode.
• The DVD mode indicator in the front
panel display appears.
• HDD mode is selected automatically
when the power is turned on.
2
Load a disc recorded in Video
mode.
3
Press |PLAY.
• Playback begins from title 1.
Playback by Selecting Title
• To play back a disc recorded and finalised
in Video mode, press DVD TOP MENU,
display the TITLE LIST screen, and select a
title to play back.
DVD-RW DVD-R
VIDEO MODE
1
Press DVD to select DVD mode.
• The DVD mode indicator in the front
panel display appears.
• HDD mode is selected automatically
when the power is turned on.
2
Load a disc recorded in Video
mode.
3
Press DVD TOP MENU.
• The TITLE LIST screen is displayed.
• If the title menu does not appear,
once press | | | | | PLAY and ISTOP/
LIVE, then press DVD TOP MENU
again.
4
Press ' / " to select the title.
5
Press SET/ENTER.
• Playback of the selected title will
begin.
6
To stop playback, press ISTOP/
LIVE.
NOTE
• If a disc recorded in Video mode has been
finalised (pages 15, 96), a menu screen will
be created automatically to enable
playback with other DVD players. For that
reason, the menu screen is different before
and after finalisation.
• If a title name was set with another DVD
recorder, and it contains characters which
cannot be displayed with this Recorder,
then " **** .... " is displayed (up to 64
characters max.).
If there is a timer programme which is set
to record on DVD:
• A message to that effect will be displayed 5
minutes prior to the start of the timer
recording. If that happens, stop DVD
playback and load the disc for recording.
• The timer recording will be cancelled at the
start time of the timer recording if DVD
playback is still in progress.
Resume playback function
• If you press | | | | | PLAY next, playback will
resume from the point where it stopped the
previous time. To playback from the
beginning, cancel resume mode by
pressing ISTOP/LIVE then press | | | | | PLAY.
(This may not work depending on the type
of disc. In such a case, open the disc tray,
turn the power off, or switch to HDD.)

DVD Video Playback

DVD VIDEO
1
Press DVD and load a disc.
• The DVD mode indicator in the front
panel display appears.
• Playback may begin automatically,
depending on the disc.
2
Press |PLAY.
• Playback begins from the first title.
• The menu may be displayed first,
depending on the disc. Perform
playback operation by following the
directions on the screen.
• To stop playback, press
ISTOP/LIVE.