Fine Tuning - Sharp DV-HR400F Operation Manual

Function Setting
VIEW/PLAY SET
PROGRESSIVE
*3
OUT SET
1 For details, see page 30.
*
* 2 For details, see page 109.
* 3 When "RGB" is selected for "L1 OUT" setting, progressive output does not work (Page 111).
Some progressive scan TVs are not fully compatible with the Recorder, which may cause image distortion. In this case,
switch "PROGRESSIVE OUT SET" from "YES" to "NO".
108
GB
PRESET
• This lets you preset the channels into memory. A maximum of 84
channels can be preset.
CHANNEL
• For details, see "CHANNEL SETTING" on page 30.

FINE TUNING

• This lets you obtain sharp colour picture.
DECODER
• If there is a separate decoder connected to the L2 terminal of the
Recorder, set this function to "ON" in order to record the unscrambled
signal and/or watch it on your TV.
SKIP
• This determines whether the channel can be selected when using
CH ' ' ' ' ' / " " " instead of Number buttons. " "
SYSTEM
• This lets you select the broadcast system (SECAM-L,PAL B/G or PAL D/K)
DELETE
• This lets you delete a channel from the Recorder memory.
NAME
• When your Recorder tunes in broadcast channels automatically, it
names them using the VPS/PDC information. The "NAME" function
lets you change the name of the channel.
NICAM
• This recorder can receive and record NICAM or A2 broadcasts.
NICAM broadcasts will be received when "AUTO" is selected in the
NICAM setting. Depending on the received programme, some
NICAM or A2 broadcasts may not be in stereo.
PROGRESSIVE OUT SET
• If this is set as "YES", conventional (interlaced scan, 625i) image is
converted into progressive scan (625p) when DVD is played back.
• Set this as "NO" if the Recorder is connected to TV which is not
compatible with progressive scan.
• Progressive output does not work unless the Recorder is connected
using a component video cable.
(PROGRESSIVE OUTPUT SETTING)
1 - 84
CHXX
ON
OFF
ON
OFF
L
B/G
D/K
AUTO
OFF
YES
NO