Switching The Tv On/Off; To Switch The Tv On; To Switch The Tv Off; Initial Settings - Sharp 28LF-94EC Operation Manual

Switching the TV ON/OFF

You can operate your TV either using the remote con-
trol handset or directly using the TV onset buttons.

To switch the TV on

Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the
RED LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button or stand-by button on the remote control
so that a programme number is selected,
or,
Press Power Button and "P/CH+" or "-P/CH" buttons on the
TV or on the remote control respectively, so the TV will
switch on and the RED Led will turn GREEN.

To switch the TV off

• Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
• Press the power button located on the front of the TV.

Initial Settings

The message "PLEASE CHECK ANTENNA CABLE!" will
be displayed when you turn on your TV for the first time.
EXECUTION APS
PLEASE CHECK ANTENNA CABLE!
LANGUAGE
COUNTRY
START
TV CANCEL
Note: If you connect Video Recorder to your TV via antenna
input (ANT socket); to tune the VCR channel automatically you
must set the VCR in play mode before you start APS. (Please
use a PAL / SECAM Video Cassette).
1- Select LANGUAGE with " " or " " button, then press
the " " or " " button to select a menu language.
2- Select COUNTRY with " " or " " button, then press the
" " or " " button to select the correct country. .
3- Select START with " " or " " button, then press the " "
button to start APS.
APS, (Automatic Programming System) automatically pro-
grammes the received channels in your TV's programme
numbers. During APS, "APS IS RUNNING PLEASE WAIT"
message will be displayed. After APS is finalized, the "PRO-
GRAM TABLE" appears.
To cancel APS, press the "
EXECUTION APS
APS IS RUNNING, PLEASE WAIT!
PROGRESS
CHANNEL
TV CANCEL
ENGLISH
SPAIN
" button.
35%
- - - - -
1 - - - - -
2 - - - - -
3 - - - - -
4 - - - - -
5 - - - - -
6 - - - - -
7 - - - - -
8 - - - - -
9 - - - - -
10 - - - - -
change
delete
Moving cursor to four direction you can reach 30 pro-
grammes in the same page. By scrolling the pages up or
down by pressing the navigation buttons you can select all
the programmes.
By cursor action, programme selection is done automatical-
ly.
Programme Number is between 1 and 99. Programme
Name has a name string with 5 characters. After autostore
process the Programme Names are set to:
• Channel search "C-01" or "S-01" (band and channel num-
ber) or name of the tuned channel if defined.
Change:
This function is used to change the places of the pro-
grammes in Program Table. Select the programme you
want to move and press BLUE button. Selected programme
will be highlighted. Move the cursor to desired program
place and press BLUE button again.
Delete:
Select the programme you want to delete and press RED
button. The programme will be deleted from the Program
Table without any warning.
• "delete" string becomes green while the selected channel
is being deleted from the Program Table.
• Press " " or "

Operating with the onset buttons

Volume setting and programme selection can be made us-
ing the buttons on the front of the TV.
Volume Setting:
• Press " " button to decrease volume or "
to increase volume, so a volume level scale will be dis-
played on the screen.
Programme Selecting:
• Press "CH " button to select next programme or " CH"
button to select the previous programme.

Operating with Remote Control

The remote control handset of your TV is designed to control all
the functions of the model you selected. The functions will be de-
scribed in accordance with the menu system of your TV.
Functions which you can use out of menu system are de-
scribed below.
ENGLISH - 8 -
11 - - - - - 21 - - - - -
12 - - - - - 22 - - - - -
13 - - - - - 23 - - - - -
14 - - - - - 24 - - - - -
15 - - - - - 25 - - - - -
16 - - - - - 26 - - - - -
17 - - - - - 27 - - - - -
18 - - - - - 28 - - - - -
19 - - - - - 29 - - - - -
20 - - - - - 30 - - - - -
TV / i EXIT
" button to exit Program Table.
TV
" button