Turning On Power; Switching Tv/Video [Avi/Av2/Component/Tv] Modes - Sharp LC-20B2UA Operation Manual

1
MAIN POWER
BASIC OPERATION (Continued)
Press MAIN POWER, located on
the upper side of the main unit, to
on.
2 The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
• The input mode indication disappears
after several seconds.
• On-screen display
_STEREO <ONAIR
SAP
_NO
2
POWER indicator
POWER
1
Turn on the power of the connected
I_ video equipment.
(I T_ " "_ 2
Press TV/MIDEO and select the
_'_ ....... / applicable input source. The screen
\ ..... © ..... / displays AV1, AV2, COMPONENT
\© 67_ ©/ or TV mode each time TV/VIDEO is
\ _o / pressed.
m,
-._ TV/VIDEO • The AV input mode indication remains
Oq _q C_q for 3 seconds.
• AVI: Videe equipment connected to the
[3q C_ C_
Gq C_ [_
AV1 input terminals.
An S-Video input terminal is
additionally provided for the AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
• AV2:AV2 mode is used to adjust the
preset settings and IN or OUT can
be selected. AV2 indication is not
displayed when OUT is selected.
(For details on setting AV-OUT,
see page 24.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
AV1 mode
AV1
!
AV2 mode
AV2
!
COMPONENT mode
COMPONENT
,!
TV mode