Table of Contents
Advertisement
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
TIMER SETTINGS
SETTINGS
ENABLE/DISABLE
REGISTRATION
SETTINGS
ADJUSTMENT
AUTO COLOR CALIBRATION
KEY OPERATOR PROGRAMS
TIMER SETTINGS
SLEEP MODE SETTING
AUTO CLEAR SETTING
PREHEAT MODE SETTINGS
MESSAGE TIME SETTING
8
Select the desired category on the touch panel.
5
Example:
OK
G
If you have selected "PRINTER" or "ACCOUNT CONTROL" in
step 4, this step is not needed.
Press the key of the desired program on the touch panel.
6
Example:
OK
60min
G
For some programs, a check box is displayed to the left of the
program name. If the box is pressed, a check mark will appear and
60sec
the program will be set. If the box is pressed again, the check mark
15min
will disappear and the program will be canceled.
G
For other programs, the program setting screen of the program
6sec
will appear when the program key is pressed.
G
If
and/or
displayed using these keys.
Follow instructions for the program.
7
G
If a mistake is made during entry, press the CLEAR (
clear the entry.
G
To continue with other key operator programs, press the "OK" key
and then select another program.
To exit the key operator program mode, press the CLEAR
8
ALL key.
To select the timer settings category, press the "TIMER
SETTINGS" key.
To see the auto clear setting, press the "AUTO CLEAR
SETTING" key.
keys are displayed, additional programs can be
) key to
Advertisement
Table of Contents
