Epson PowerLite Cinema 200 User Manual Supplement

Epson PowerLite Cinema 200 Update
®
Your projector includes an additional picture quality setting not described in your User's Guide.
If you notice faint vertical bands in the picture, you can eliminate them by following these steps:
1. Turn on the projector and let it warm up for about 10 minutes.
2. Darken the room lights. You do not need to project an image from a video source to perform
this adjustment.
3. Press the button on the remote control.
Menu
4. Use the arrow buttons to highlight the
menu and select
Operation
You see this screen, which lets you correct each of the three RGB (red, green, blue) color
components:
5. Select
Vertical Stripe Adjustment R
Light part of
the screen
6. Look at the screen to determine where the vertical bands are more visible—in the light or dark
part of the screen. This is the part you should adjust first.
Note: The banding (if visible) appears within each bar or stripe on the screen.
®
Setting

LCD Panel Adjustment

. You see this screen:
menu, press to select it, then open the
.
Bands