Connecting To A Conventional Tv - Sharp DV-SL1200W Operation Manual

Connecting to a conventional TV

Connect the DVD player to your TV.
(DV-SL1200W)
DVD player
To VIDEO
OUT socket
(Yellow)
To audio
To AUDIO OUT
input sockets
sockets
Audio/Video cable
(supplied)
Notes:
I Please refer to your TV instruction manual.
I When you connect the DVD player to your TV, be sure to turn off the power
and disconnect both units from the wall socket until all the connections have
been made.
I If your TV has one audio input socket, connect the AUDIO OUT sockets of
the DVD player to a Y-cable adaptor (not supplied), then connect it to the TV
Audio input. Please consult your local audio/video dealer.
I Do not connect the DVD player to a VCR directly. The playback picture will
be distorted because DVD discs are copy protected.
TV with Audio/Video input sockets
R-AUDIO-L VIDEO
AUDIO
VIDEO
INPUT
1
To video input
socket (Yellow)
Using the COMPONENT VIDEO OUT sockets
Notes:
Please follow the steps before turn on the power.
1. If your TV has the component video input sockets, connect the DVD player
to these sockets. (The VIDEO OUT socket connection is not necessary.)
You can enjoy high quality picture playback.
2. You also need to connect the left and right audio cables to the AUDIO OUT
sockets of DVD player and the Audio input sockets of the TV.
DVD player
*Component video cable (not supplied)
(DV-SL1200W)
TV
COMPONENT VIDEO INPUT
Y P P
B R
DV-SL1200W
DV-SL2200W
10