Display Setting; Language Setting - Sharp DV-SL10 Operation Manual

E57B9QD.QX3 03.5.29 4:27 PM Page 20
DVD SETUP

Display Setting

You can change certain aspects of the DVD display screens,
on-screen messages and the display panel on the front of
the DVD player.
1 Press SETUP in STOP mode.
2
Press B to select (CUSTOM), then press
ENTER.
• On screen menu will appear.
3 Press B to select (DIS-
PLAY), then ENTER to con-
firm.
4 Press K or L to select the
below items, then press
ENTER.
TV ASPECT :
• Press K or L for an item selection, then press ENTER.
• Select 4:3 LETTER BOX for a black bars appears on
top and bottom of the screen.
• Select 4:3 PAN & SCAN for a full height picture with
both sides trimmed.
PAN & SCAN is only available on DVDs recorded with
this option, if not LETTER BOX mode will be used.
• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.
• The default setting is 4:3 LETTER BOX.
• You can also adjust the setting from
menu.
PANEL DISPLAY :
• Press K or L for an item select BRIGHT, DIMMER and
AUTO, then press ENTER.
• This adjust the brightness of the display panel with the
factory default BRIGHT.
• When AUTO is selected, the display dims only during
playback.
NOTE:
• You can change the PANEL DISPLAY setting (BRIGHT
or DIMMER) by pressing DIMMER on the remote con-
trol.
ANGLE ICON :
• Press ENTER repeatedly to turn Angle icon ON or
OFF.
• The default setting is ON.
AUTO POWER OFF :
• Press ENTER repeatedly to turn Auto Power off ON or
OFF.
• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.
VIDEO OUT :
• Press ENTER repeatedly to turn video out PAL or AUTO.
• The default setting is PAL.
When playing an NTSC disc
• If you have a PAL TV, select PAL; the modified PAL
signal will be output.
• If you have a NTSC TV or Multi system TV, select
AUTO; the NTSC signal will be output.
5 Press SETUP to exit.
NOTE:
• Be sure to press the SETUP button, or the setting will not
work.

Language Setting

Language options are not available with some discs.
1 Press SETUP in STOP mode.
2 Press B to select
ENTER.
• On screen menu will appear.
3
Press s or B to select
ENTER to confirm.
4
Press K or L to select the below
items, then press ENTER.
DISPLAY
TV ASPECT 4:3 LETTER BOX AUDIO :
PANEL DISPLAY BRIGHT
ANGLE ICON ON
• Sets the audio language.
AUTO POWER OFF ON
VIDEO OUT PAL
SUBTITLE :
• Sets the subtitle language.
DISC MENU :
• Sets the language for DVD Menu.
PLAYER MENU :
• Sets the language for the On-Screen display.
• You can also adjust the setting from
menu.
5 Press K or L to select a setting, then press
ENTER.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the
(QUICK) setup
code for the desired language. (Refer to the language
code list on the next page).
• Only the languages supported by the disc can be
selected.
6 Press SETUP to exit.
NOTE:
• Language Setting for Audio and Subtitle is not available
with some discs. Then use AUDIO and SUBTITLE. Details
are on page 17.
– 20 –
(CUSTOM), then press
(LANGUAGE), then
LANGUAGE
AUDIO ORIGINAL
SUBTITLE OFF
DISC MENU ENGLISH
PLAYER MENU ENGLISH
(QUICK) setup
EN